Technical Specifications
V145:
| INPUT | |||
| Input Voltage 230 V – 15% Single Phase | Input Power at Rated Output 3.0 kW @ 100% Duty Cycle 4.4 kW @ 35% Duty Cycle | EMC ClassA group 2 | Frequency50/60 Hz |
| RATED OUTPUT | |||
| Duty Cycle(Based on a 10 min. period @ 40°C) 100%35%(Based on a 10 min. period @ 20°C) 100%60% | Output Current105A145A120A145A | Output Voltage24.2 Vdc25.8 Vdc24.8 Vdc25.8 Vdc | |
| OUTPUT RANGE | |||
| Welding Current Range5 – 145A | Maximum Open Circuit Voltage 75 Vdc (CE model)12 Vdc (CE 12V model)12 Vdc (AUSTRALIA model) | ||
| RECOMMENDED INPUT CABLE AND FUSE SIZES | |||
| Fuse (delayed) orCircuit Breaker (“D” characteristic) Size 16A | Type of PlugSCHUKO 16A / 250V or AUSTRALIAN 15A / 250V (Included with Machine) | Input Power Cable 3 Conductor, 2.5 mm |
Accessories
| KIT-140A-16-3M | Welding kit cables (3m, 16mm2). |
| KIT-140A-25-5M | Welding kit cables (5m, 25mm2). |
| W0400062A | TIG torch with tap, 4m. |
| W7915000A | Carrying case with accessories: Welding kit cables (3m, 16mm2), Hammer/wire brush, Welding mask with glasses. |
| W9900021A | Carrying case. |
Before installing the machine, the operator must check the work area for any devices that may malfunction because of electromagnetic disturbances. Consider the following.
• Input and output cables, control cables, and telephone cables that are in or adjacent to the work area and the machine.
• Radio and/or television transmitters and receivers. Computers or computer controlled equipment.
• Safety and control equipment for industrial processes. Equipment for calibration and measurement.
• Personal medical devices like pacemakers and hearing aids.
• Check the electromagnetic immunity for equipment operating in or near the work area. The operator must be sure that all equipment in the area is compatible. This may require additional protection measures.
• The dimensions of the work area to consider will depend on the construction of the area and other activities that are taking place. Consider the following guidelines to reduce electromagnetic emissions from the machine.
• Connect the machine to the input supply according to this manual. If disturbances occur if may be necessary to take additional precautions such as filtering the input supply.
• The output cables should be kept as short as possible and should be positioned together. If possible connect the work piece to ground in order to reduce the electromagnetic emissions. The operator must check that connecting the work piece to ground does not cause problems or unsafe operating conditions for personnel and equipment.
• Shielding of cables in the work area can reduce electromagnetic emissions. This may be necessary for special applications.
Reviews
Clear filtersThere are no reviews yet.